Browse Month: January 2018

Become A Cell Phone Expert With These Tips!

Cell phones are used for a number of reasons. From sending emails to making phone calls, a cell phone can be a person’s best friend. But, you will never truly enjoy your phone if you have no knowledge on these devices. This article will give you cell phone advice to help you take full advantage of your cell phone.

When you are in the market for a cell phone, be sure to shop different providers for the best prices. Many providers offer the exact same phones for great deals if you are willing to sign a contract. Just make sure to also check out the attached plans, because sometimes saving on the phone isn’t worth it if the plan will be more expensive in the end.

Did you know that the battery in your cell phone has some reserved power? If you find that your cell phone battery is dead, and you have no way to charge it, enter the USSD “*3370#”. You will see up to a 50% increase in power. This reserve power will charge the next time you charge your phone.

Think about the insurance that you are purchasing and whether or not it is really worth it in the long run. Sometimes, plans will be very valuable though, and for 10 dollars a month can replace your phone for free if you break it. This could save you hundreds of dollars if you were to replace your phone at retail price.

Consider buying the insurance on your cell phone. This can save you money in the long run. If your phone is broken, stolen or in any way damaged, you will no longer be able to use it in most cases. This will require you to buy a new phone, and that can cost hundreds. Insurance allows you to buy a new phone for a discounted price, and that can be well worth the monthly investment.

Did you know that the battery in your cell phone has some reserved power? If you find that your cell phone battery is dead, and you have no way to charge it, enter the USSD “*3370#”. You will see up to a 50% increase in power. This reserve power will charge the next time you charge your phone. Buy App Reviews on your Andorid App to Boost Your App Ranking! 100% legitimate service trusted by thousands of developers.

Don’t bother with covers for your cell phone’s screen. There are many accessories that can improve your experience with your cell phone; cell phone covers usually aren’t one of them. Most cell phone screens are already scratch resistant, and the plastic cover will only make the touch screen less responsive.

Consider whether you need a smart phone. Smartphones are expensive, but they offer a lot for the money. But do you need all those bells and whistles? A smartphone will cost you a lot of money upfront. It may be best to seek other options.

Don’t invest in the most expensive cell phone available on the market. There are plenty of great phones for half the price of a more expensive one. When you purchase overpriced phones, you are generally paying for the level of popularity they have and the brand name. More affordable phones can be just as great, but perhaps not as popular as an iPhone.

Remember that the camera on a phone will lack an optical zoom feature. To photograph an object up close, you must physically move nearer to it. It is possible to buy lenses that snap onto a phone for zooming purposes.

As this article has proven, there was probably a lot about cell phones you did not know before today. The article above provided you with the best cell phone information around. To really enjoy your cell phone and take advantage of all it can offer you, be sure to use the above tips.…

How to Rip Wood on a Table Saw

Some woodwork tasks require the use of a table saw to cut through, ripping wood is one such example. Ripping simply means cutting a long board lengthwise, to build or renovate a door or window frame. Likewise, you constantly have to shave about a half an inch or so from the length of the wood board.

Consequently, it is impossible to make such straight cuts with a circular saw or a hand saw. Sometimes you cannot even make the cut. You would know this if you have done so or tried. A table saw is always the best answer to wood ripping.

However, if you are still new at woodworking, here is a simple guide on how to rip wood on a table saw.

Loosening the Gate

This is a metal guide, which runs parallel to the saw blade on the table saw. You will have to loosen it a bit to ease it sliding. Do not remove it from its positioning, by any means.

Making Markings on Your Wood Board

You can use a tape measure to make the markings on the wood board. Make sure you mark the exact midpoint of the width of the wood board with a clear pencil, no need to draw a whole line, all the way down the board length.
This is because the gate will help you maintain a straight line up to where you want. You just have to adjust its measurements the way you want and trust on the saw to maintain the measurement all the way through, no hassle.

Setting the Gate

To ensure you get the correct cut. Set the board′s marked end on top of the table saw. Make sure that you adjust the wood, this way the teeth of the saw touches your pencil marks.

After which you move the wood board a bit to the left to ensure you do not make the cuts on the pencil marks. This is because table saws usually chew off the measurements with at least 1/8 inch. Therefore, you need to preserve the wood board.

Lastly, you have to ensure that the gate is snug against the set wood, and then snap it back into place tightly.

Leveling the Board

You can level the board if you have a stand-alone saw. This means you will have to have a leveled working surface area, on both sides of the table saw. Likewise, the surface should level very well with the top of the saw. You can always improvise and use stacks of wood blocks with plywood as a top layer.

However, you can skip this step if you are cutting shorter wood boards of less than four feet or have a table saw that is set into an actual table. Nonetheless, for longer wood boards, the boards will seesaw as you feed it through.

Running the Wood through the Table Saw

Before you run the wood, flip the power switch on, and ensure that the saw′s safety guard is down. After which you can start to push the board slowly but at a steady rate. Make sure you keep it lightly pressed against the gate.

Keep the wood moving because if you stop or slow down, you will notch some big grooves out of your wood board, thus destroying your straight line.

When you are halfway through, try to concentrate more on the wood that is coming through the saw rather than the one on the feed end. You will have to switch your positioning a bit and maneuver with your foot, in order to stop pushing the wood through and start pulling it.

Another option is to keep pushing the wood through, but remember the more you push the closer your hands get to the saw blade. Nonetheless, you can use a push stick to force the wood board through that last foot.


There you have it, a simple way to rip wood on a table saw. Moreover, you should remember to clear off your working area before you start ripping, to limit any unnecessary accidents. Moreover, always put on your safety gear from gloves, safety glasses, and some tight-fitting clothes to avoid saw hazards.
You should also ensure that the table saw and every component in it, is working properly.You can do that by reading about different table saw reviews here. Likewise, make sure that you can easily locate the saw′s safety guard, in case of an accident.…